数学代写|组合数学代写Combinatorial Mathematics代考|CS-E4555 The case derived from the second P- or Q-polynomial orderings

如果你也在 怎样代写组合数学Combinatorial Mathematics CS-E4555这个学科遇到相关的难题,请随时右上角联系我们的24/7代写客服。组合学Combinatorics是数学的一个领域,主要涉及计数(作为获得结果的手段和目的)以及有限结构的某些属性。主要涉及计数,作为获得结果的手段和目的,以及有限结构的某些属性。它与数学的许多其他领域密切相关,有许多应用,从逻辑学到统计物理学,从进化生物学到计算机科学。

组合数学 Combinatorial Mathematics因其解决的问题的广泛性而闻名。组合问题出现在纯数学的许多领域,特别是在代数、概率论、拓扑学和几何学中,以及在其许多应用领域。许多组合问题在历史上被孤立地考虑,对某个数学背景下出现的问题给出一个临时性的解决方案。然而,在二十世纪后期,强大而普遍的理论方法被开发出来,使组合学本身成为一个独立的数学分支。组合学最古老和最容易理解的部分之一是图论,它本身与其他领域有许多自然联系。在计算机科学中,组合学经常被用来获得算法分析中的公式和估计。

组合数学 Combinatorial Mathematics代写,免费提交作业要求, 满意后付款,成绩80\%以下全额退款,安全省心无顾虑。专业硕 博写手团队,所有订单可靠准时,保证 100% 原创。 最高质量的组合数学 Combinatorial Mathematics作业代写,服务覆盖北美、欧洲、澳洲等 国家。 在代写价格方面,考虑到同学们的经济条件,在保障代写质量的前提下,我们为客户提供最合理的价格。 由于作业种类很多,同时其中的大部分作业在字数上都没有具体要求,因此组合数学 Combinatorial Mathematics作业代写的价格不固定。通常在专家查看完作业要求之后会给出报价。作业难度和截止日期对价格也有很大的影响。

海外留学生论文代写;英美Essay代写佼佼者!

EssayTA有超过2000+名英美本地论文代写导师, 覆盖所有的专业和学科, 每位论文代写导师超过10,000小时的学术Essay代写经验, 并具有Master或PhD以上学位.

EssayTA™在线essay代写、散文、论文代写,3分钟下单,匹配您专业相关写作导师,为您的留学生涯助力!

我们拥有来自全球顶级写手的帮助,我们秉承:责任、能力、时间,为每个留学生提供优质代写服务

论文代写只需三步, 随时查看和管理您的论文进度, 在线与导师直接沟通论文细节, 在线提出修改要求. EssayTA™支持Paypal, Visa Card, Master Card, 虚拟币USDT, 信用卡, 支付宝, 微信支付等所有付款方式.

数学代写|组合数学代写Combinatorial Mathematics代考|CS-E4555 The case derived from the second P- or Q-polynomial orderings

数学代写|组合数学代写Combinatorial Mathematics代考|The case derived from the second P- or Q-polynomial orderings

In this section, if a symmetric association scheme $\mathfrak{X}=\left(X,\left{R_i\right}_{0 \leq i \leq d}\right)$ has two Ppolynomial orderings, we consider the two P-polynomial schemes are distinct. For Q-polynomial schemes which have two Q-polynomial orderings, we consider similarly.

Let $\mathfrak{X}=\left(X,\left{R_i\right}_{0 \leq i \leq d}\right)$ be a P-and Q-polynomial scheme. Let $R_0, R_1, \ldots, R_d$ be the P-polynomial ordering and $A_1$ the adjacency matrix of $R_1$. Note that the numbering of primitive idempotents $\left{E_i\right}_{0 \leq i \leq d}$ is determined by $A_1=\sum_{i=0}^d \theta_i E_i$, where $\left{\theta_i\right}_{0 \leq i \leq d}$ are the eigenvalues of $A_1$. The intersection numbers $b_i=p_{1, i+1}^i(0 \leq i \leq d-1)$, $c_i=p_{1, i-1}^i(1 \leq i \leq d)$ are determined by the P-polynomial ordering $R_0, R_1, \ldots, R_d$ and they are expressed by AW-parameters $\Lambda_Z$, where $\mathrm{Z}$ denotes the type which is one of I, IA, II, IIA, IIB, IIC, and III. The AW-parameters $\Lambda_Z$ determine the ordering of the eigenvalues $\theta_0, \theta_1, \ldots, \theta_d$ of the adjacency matrix $A_1$, and hence they determine the Q-polynomial ordering $E_0, E_1, \ldots, E_d$. Therefore, if a P- and Q-polynomial scheme has two Q-polynomial orderings, the intersection numbers $b_i(0 \leq i \leq d-1), c_i(1 \leq i \leq d)$, which are determined by a fixed P-polynomial ordering, have two distinct expressions by AW-parameters.

Similarly, if a P-and Q-polynomial scheme $\mathfrak{X}=\left(X,\left{R_i\right}_{0 \leq i \leq d}\right)$ has two P-polynomial orderings, the dual intersection numbers $b_i^(0 \leq i \leq d-1), c_i^(1 \leq i \leq d)$, which are determined by a fixed Q-polynomial ordering of the primitive idempotents $E_0, E_1, \ldots, E_d$, have two distinct expressions by AW-parameters.

数学代写|组合数学代写Combinatorial Mathematics代考|The Johnson scheme J(2d + 1, d)

As was seen before, the Johnson scheme $J(v, d)\left(1 \leq d \leq \frac{v}{2}\right)$ is a P- and Qpolynomial scheme with AW-parameters of Type IIA: $\Lambda_{\mathrm{IIA}}=\left(r_1,-, s,-; h, h^, \theta_0, \theta_0^ \mid d\right)$, $r_1=-v+d-1, s=-v-2 ; h=1, h^=-v(v-1) / d(v-d) ; \theta_0=d(v-d), \theta_0^=v-1$. If $v=2 d+1$, the dual intersection numbers $b_i^=q_{1, i+1}^i, c_i^=q_{1, i-1}^i$ are
$$
\begin{aligned}
& b_i^=\frac{2 d+1}{d+1} \frac{(d-i)(2 d+2-i)}{2 d+1-2 i}, \quad 0 \leq i \leq d-1, \ & c_i^=\frac{2 d+1}{d+1} \frac{i(d+2-i)}{2 d+3-2 i}, \quad 1 \leq i \leq d,
\end{aligned}
$$
and these dual intersection numbers of $J(2 d+1, d)$ have another expression by AWparameters:
$$
\begin{aligned}
\Lambda_{\mathrm{III}} & =\left(r_1, r_2, s, s^* ; h, h^, \theta_0, \theta_0^ \mid d\right), \
r_1 & =-2 d-3, \quad r_2=-d-1, \quad s=-2 d-3, \quad s^=-2 d-2, \ h & =-\frac{1}{2}, \quad h^=-\frac{2 d+1}{2(d+1)}, \quad \theta_0=d+1, \quad \theta_0^*=2 d .
\end{aligned}
$$

数学代写|组合数学代写Combinatorial Mathematics代考|CS-E4555 The case derived from the second P- or Q-polynomial orderings

组合数学代写

数学代㝍组合数学代㝍Combinatorial Mathematics 代 考|The case derived from the second $P$ – or $Q$-polynomial orderings


在本节中, 如果一个对称关联方案 们认为这两个 $P$ 多项式方案是不同的。对于具有两个 $Q$ 多项式序的 $Q$ 多项式方案, 我们 类似地考虑。
让 $\backslash$ mathfrak ${X}=\backslash l e f t\left(X, \backslash\right.$ left $\left{R _i \backslash r i g h t\right}_{-}{0 \backslash$ leq i $\backslash$ leq $\mathrm{d}} \backslash$ right $)$ 是 $P$ 和 $Q$ 多项式方案。 让 $R_0, R_1, \ldots, R_d$ 是 $\mathrm{P}$ 多项式排序和 $A_1$ 的邻接矩阵 $R_1$. 请注意, 原始帛等元的编号
$b_i=p_{1, i+1}^i(0 \leq i \leq d-1), c_i=p_{1, i-1}^i(1 \leq i \leq d)$ 由 $\mathrm{P}$ 多项式排序确定
$R_0, R_1, \ldots, R_d$ 它们由 $\mathrm{AW}$ 参数表示 $\Lambda_Z$, 在哪里Z表示类型是 I、IA、II、IIA、
IIB、IIC 和 III 之一。AW 参数 $\Lambda_Z$ 确定特征值的顺序 $\theta_0, \theta_1, \ldots, \theta_d$ 邻接矩阵 $A_1$, 因 此他们确定 $\mathrm{Q}$ 多项式排序 $E_0, E_1, \ldots, E_d$. 因此, 如果 $\mathrm{P}$ 多项式和 $\mathrm{Q}$ 多项式方案具有 两个 $\mathrm{Q}$ 多项式顺序, 则交集数 $b_i(0 \leq i \leq d-1), c_i(1 \leq i \leq d)$ 由固定的 $\mathrm{P}$ 多项式 排序确定, 具有两个不同的 AW 参数表达式。
类似地, 如果 $P$ 和 $Q$ 多项式方案
$\backslash$ mathfrak ${X}=\backslash$ left $\left(X, \backslash\right.$ eft $\left.\left{R _i \backslash r i g h t\right} _{0 \backslash \text { leq i } \backslash \text { leq d }} \backslash r i g h t\right)$ 有两个 $P$ 多项式排序, 对 偶交集数 $\left.\left.b_i^{(} 0 \leq i \leq d-1\right), c_i^{(} 1 \leq i \leq d\right)$, 它们由原始㝜等元的固定 $Q$ 多项式排序 确定 $E_0, E_1, \ldots, E_d$, 有两个不同的 $\mathrm{AW}$ 参数表达式。

数学代㝍组合数学代㝍Combinatorial Mathematics代 考|The Johnson scheme J(2d $+1$, d)


如前所述, 约翰逊方案 $J(v, d)\left(1 \leq d \leq \frac{v}{2}\right)$ 是具有类型 IIA 的 AW 参数的 $\mathrm{P}$ 和 $\mathrm{Q}$ 多 项式方案: $\Lambda_{\text {IIA }}=\left(r_1,-, s,-; h, h \cdot \theta_0, \theta_0^{\mid} d\right)$, $r_1=-v+d-1, s=-v-2 ; h=1, h^{=}-v(v-1) / d(v-d) ; \theta_0=d(v-d), \theta_0=v$ . 竘果 $v=2 d+1$, 双交点数 $b_i^{\overline{-}} q_{1, i+1}^i, c_i^{\overline{-}} q_{1, i-1}^i$ 是 $b_i^{=} \frac{2 d+1}{d+1} \frac{(d-i)(2 d+2-i)}{2 d+1-2 i}, \quad 0 \leq i \leq d-1, \quad c_i^{=} \frac{2 d+1}{d+1} \frac{i(d+2-i)}{2 d+3-2 i}$,
和这些双重交集数 $J(2 d+1, d)$ AWparameters 有另一个表达式:
$$
\Lambda_{\mathrm{III}}=\left(r_1, r_2, s, s^* ; h, h \cdot \theta_0, \theta_0 d\right), r_1 \quad=-2 d-3, \quad r_2=-d-1, \quad s=-2 d \Theta
$$

数学代写|组合数学代写Combinatorial Mathematics代考

数学代写|组合数学代写Combinatorial Mathematics代考 请认准UprivateTA™. UprivateTA™为您的留学生涯保驾护航。

微观经济学代写

微观经济学是主流经济学的一个分支,研究个人和企业在做出有关稀缺资源分配的决策时的行为以及这些个人和企业之间的相互作用。my-assignmentexpert™ 为您的留学生涯保驾护航 在数学Mathematics作业代写方面已经树立了自己的口碑, 保证靠谱, 高质且原创的数学Mathematics代写服务。我们的专家在图论代写Graph Theory代写方面经验极为丰富,各种图论代写Graph Theory相关的作业也就用不着 说。

线性代数代写

线性代数是数学的一个分支,涉及线性方程,如:线性图,如:以及它们在向量空间和通过矩阵的表示。线性代数是几乎所有数学领域的核心。



博弈论代写

现代博弈论始于约翰-冯-诺伊曼(John von Neumann)提出的两人零和博弈中的混合策略均衡的观点及其证明。冯-诺依曼的原始证明使用了关于连续映射到紧凑凸集的布劳威尔定点定理,这成为博弈论和数学经济学的标准方法。在他的论文之后,1944年,他与奥斯卡-莫根斯特恩(Oskar Morgenstern)共同撰写了《游戏和经济行为理论》一书,该书考虑了几个参与者的合作游戏。这本书的第二版提供了预期效用的公理理论,使数理统计学家和经济学家能够处理不确定性下的决策。



微积分代写

微积分,最初被称为无穷小微积分或 “无穷小的微积分”,是对连续变化的数学研究,就像几何学是对形状的研究,而代数是对算术运算的概括研究一样。

它有两个主要分支,微分和积分;微分涉及瞬时变化率和曲线的斜率,而积分涉及数量的累积,以及曲线下或曲线之间的面积。这两个分支通过微积分的基本定理相互联系,它们利用了无限序列和无限级数收敛到一个明确定义的极限的基本概念 。



计量经济学代写

什么是计量经济学?
计量经济学是统计学和数学模型的定量应用,使用数据来发展理论或测试经济学中的现有假设,并根据历史数据预测未来趋势。它对现实世界的数据进行统计试验,然后将结果与被测试的理论进行比较和对比。

根据你是对测试现有理论感兴趣,还是对利用现有数据在这些观察的基础上提出新的假设感兴趣,计量经济学可以细分为两大类:理论和应用。那些经常从事这种实践的人通常被称为计量经济学家。



MATLAB代写

MATLAB 是一种用于技术计算的高性能语言。它将计算、可视化和编程集成在一个易于使用的环境中,其中问题和解决方案以熟悉的数学符号表示。典型用途包括:数学和计算算法开发建模、仿真和原型制作数据分析、探索和可视化科学和工程图形应用程序开发,包括图形用户界面构建MATLAB 是一个交互式系统,其基本数据元素是一个不需要维度的数组。这使您可以解决许多技术计算问题,尤其是那些具有矩阵和向量公式的问题,而只需用 C 或 Fortran 等标量非交互式语言编写程序所需的时间的一小部分。MATLAB 名称代表矩阵实验室。MATLAB 最初的编写目的是提供对由 LINPACK 和 EISPACK 项目开发的矩阵软件的轻松访问,这两个项目共同代表了矩阵计算软件的最新技术。MATLAB 经过多年的发展,得到了许多用户的投入。在大学环境中,它是数学、工程和科学入门和高级课程的标准教学工具。在工业领域,MATLAB 是高效研究、开发和分析的首选工具。MATLAB 具有一系列称为工具箱的特定于应用程序的解决方案。对于大多数 MATLAB 用户来说非常重要,工具箱允许您学习应用专业技术。工具箱是 MATLAB 函数(M 文件)的综合集合,可扩展 MATLAB 环境以解决特定类别的问题。可用工具箱的领域包括信号处理、控制系统、神经网络、模糊逻辑、小波、仿真等。

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注